Indoor LED Light PCB Or Will Be Popularized

Indoor LED Light PCB or will be popularized

Indoor LED lamps or will be popularized, why do you say so? Today, led lighting in outdoor use is already surprising, but in the indoor use or in the initial stage. However, look at the trend of the use of indoor LED lamps today, in the future is not universal use is not possible!

    There are three reasons, as follows:

    First, now the production of indoor LED lamps more and more manufacturers, and the product is serialized, integrated or even intelligent. Only in this way can we meet the broad market demand. In addition, the advent of e-commerce era, Indoor LED Light PCB in the Internet market also accounted for a large part, such as Taobao, Lynx, Alibaba sell Indoor LED Light PCB is also very much. If there is no quality assurance of the manufacturers or shops, in today's full of eye-catching era, is unable to survive. Therefore, consumers need not worry about quality problems.

    Second, Indoor LED Light PCB products are more and more humane. Lighting, after a series of evolution, is slowly becoming a fashion, humanized lighting products become the first choice, and LED lighting small size, unlike the traditional light source has a glass, and easy to control the light , In the appearance of the human design of the lighting to the LED lighting manufacturers unlimited play space.

    Third, why is it called led light? It is the difference between it and the traditional lighting, it can improve the utilization of luminous flux, the maximum reduction in integrated lighting costs. Although the LED light source is not as good as some traditional light source, but because of the LED light source light direction, high utilization rate, so long as through reasonable optical processing, the maximum use of its luminous flux, in terms of illumination, LED can achieve the function Lighting requirements.

    Fourth, in general, led lights after transformation, the life is much longer than the traditional lighting. In addition, also solved the high-power LED lighting cooling technology, the maximum delay of high-power LED lighting light failure.

      Indoor LED Light PCB is that we usually say that led energy-saving lamps, it is a big difference with ordinary lights, of course, the biggest difference is energy saving. However, if your home to install the indoor LED lamps, then, you still have to pay attention to some of the indoor LED lamps on the use of attention.

Indoor LED lamps First of all, the indoor LED lamps in the use of time, and not because that can be turned off the power and frequent opening, so that the damage to energy-saving lamps is very large. Why is this? Because when opened, the moment to produce high pressure, this time is particularly vulnerable to damage the lamps. In general, the switch once equal to 10 hours of energy-saving lamp life, and, when the start of the power consumption is 3 times the normal work.

    Therefore, when you open the Indoor LED Light PCB, try not to close, unless you say, you have to go out, or do not need to turn on the lights for a long time, then you can choose to close.

    In addition, the energy-saving lamps should not be used in the dimmable lamps, dimming lamps most of the circuit is the normal sine wave to eliminate a part, thereby reducing the effective value of the output voltage, but this wave makes the energy saving lamp electronic ballast The device can not work.

    In short, the above points can be attributed to two points: First, do not frequent switch; Second, do not use in the dimming lamps. I hope this article can let everyone on the indoor LED lights have a better understanding!