Maintenance Of LED Light PCB Eight Skills

Maintenance of LED Light PCB eight skills
Today for everyone is how to correctly maintain the LED Light PCB, in the daily maintenance and maintenance, the vast majority of people do not understand. In the online search of the following LED lights PCB maintenance knowledge, hope to worry about you can help.
    First, properly keep the LED Light PCB product brochures and related accessories
The PCB of the LED must be used at a predetermined voltage and frequency. LED Light PCB cleaning and maintenance should be turned off before the power switch or cut off the power.
 Second, not free to wipe, although the LED surface of the PCB are coated with multi-layer paint coating and protective paint, but does not mean that you can freely wipe, in order to make your LED Light PCB surface long as glorious, we recommend that you do May use the feather duster gently remove the dust can be, or with a professional dust soft brush brush brush to the LED surface of the LED dust, of course, soft texture of the dry cotton can also be used.
     Third, where the grounding of the LED lights PCB must always check the ground condition
The PCB of the safety lighting LED should be checked regularly to ensure that no abnormality occurs. When switching the lamp, removing the cover and the fuse, the power must be switched off.
     Fourth, moisture-proof water is the key to LED lamp PCB maintenance
Do not use wet cloth to wipe the LED light of the PCB, especially the light source, the pipeline part, to prevent the cause of conduction, short circuit, or premature rust, paint and other phenomena, the application of warm water scrub or wring dry soapy cloth scrub LED PCB, can not use gasoline, volatile oil scrub, LED lights behind the PCB dust is easy to use dry cloth or duster sweep.
     Fifth, the use, maintenance, attention to security risks
Do not place paper and cloth or the like in the vicinity of the illuminator or cover the illuminator. Do not change the PCB structure of the LED lamp or replace the PCB parts of the LED lamp when cleaning.
     Six, repair LED Light PCB place taboo
Can not have gas, steam and other dangerous places repair LED Light PCB, but should be carried out in general places; forced to carry out, to ensure the safety of operations. Apply a warm water scrub or twist dry soapy cloth to scrub the LED light of the PCB, can not use gasoline, volatile oil scrub.
Seven, crystal lamp maintenance
Crystal pendants can be removed for cleaning, to be completely dry and then can be re-hung up, but should pay attention to the hook part of the connection as much as possible to avoid water, to prevent rust. Also note whether the connection hook is secure after disassembly.
     Eight, the use of LED lights PCB abnormalities
When using an LED lamp in the process of abnormal circumstances, should stop using, cut off the power, to check.
With the economic development, the continuous improvement of national living standards, energy conservation and environmental protection of this topic more and more people's attention. At present, many projects in the energy saving and environmental protection has achieved great success. For example, in the energy-saving this one, LED lamps to play a very big role. According to experts predict that by 2020, the global LED market share will reach 80%. Then LED lamps in the end how energy-saving, take days Hyun lighting LED lights for the LED lights, a 5-watt LED lamp light is equivalent to 15 watts of ordinary energy-saving lamps,