What Are The Advantages And Prospects Of Indoor LED Light PCB?

What are the advantages and prospects of Indoor LED Light PCB?
Indoor LED Light PCB, as the name suggests, so that the same light as the water washed the wall, mainly used for building decorative lighting purposes, there are used to outline the outline of large buildings. As the LED with energy saving, high luminous efficiency, rich colors, long life and other characteristics, so in 2014 the other light source wall was gradually replaced by Indoor LED Light PCB.

1, the power size: the size of the walled lamp determines the size of its projection, the general conventional 18W, 24W, 36W, 48W and other parameters. But the power is not fixed. Power can be flexibly changed as required! General high-power Indoor LED Light PCB are single-row, multi-row called linear LED flood light!
2, the voltage: the voltage of the Indoor LED Light PCB can be divided into DC and AC AC, the general built-in power supply AC220V (Japan AC110V) electricity, etc., are generally low-voltage DC24V, DC12V, DC27V, etc.
3, IP protection level: This is an important parameter of the wall washer, but also affect the quality of the current guardrail tube an important indicator of the requirements of the water level should be above the IP65 is the best, but also requires a related pressure, , Resistant to high and low temperature, fire, impact aging level.
4, color specifications: sub-colorful, full color, monochrome Appearance optional black white and silver
5, color temperature: 2700-7000K
6, light angle: indoor LED light its light angle is generally narrow (20 degrees), in (50 degrees), wide (about 120 degrees) three, at present, the light era of high power Indoor LED Light PCB (narrow angle) The farthest effective projection distance is 5-10 meters.
7, the working temperature: because the wall was usually used in the outdoor more, so this parameter is more important, the temperature requirements are relatively high, the general situation we require the outdoor temperature -40 ℃ +60 ℃ can work.
8, the control mode: the Indoor LED Light PCB, there are two control methods: internal control and external control two. Internal control is no external controller, the design of the control system designed in the wall inside the wall, the degree of effect can not be changed. External control is an external controller, the effect can be adjusted through the master button to change the effect. Usually in large projects above, the customer can change their own requirements, we are using external control of this program.
9, mirror: glass reflective lens, light transmission rate of 98-98%, not easy to atomize, anti-UV radiation.
10, the light source: the general use of 1W, 3WLED as a light source, but because of immature technology, the current market is relatively common 1W, because 3W heat, do bad heat to do bad light faster.
If the Indoor LED Light PCB cleaning and maintenance work is not in place, it is easy to shorten the life of the lamp. Indoor LED Light PCB professional and technical personnel, the appropriate maintenance cleaning will help improve the brightness of Indoor LED Light PCB.
If you do not maintain a year, the brightness of Indoor LED Light PCB will drop about 20%; if laissez-faire, lamp, etc. in a dirty state, 1 year time brightness will be reduced by 20%;
In the kitchen and other places easy to dirty, then the brightness of Indoor LED Light PCB will be reduced by 40%. Therefore, regular cleaning and maintenance is to ensure that the brightness of Indoor LED Light PCB tips.
In the cleaning and maintenance should be careful not to change the structure of Indoor LED Light PCB, and do not casually replace the Indoor LED Light PCB parts, after the end of cleaning and maintenance, should be installed as usual Indoor LED Light PCB, do not miss, misplaced lighting parts.
In the specific cleaning and maintenance of Indoor LED Light PCB, it is best not to use water to clean, as long as the dry wipes can be wiped with water, if not careful to touch the water to try to dry, avoid turning on the lights immediately wipe with a wet cloth, High temperature water burst.